The heart of PÖTTINGER disc mowers is the cutter bar; proven over thousands of cuts in the field. Disc mower cutter bars are developed and built at the company’s main plant in Grieskirchen – a quality product made in Austria. First-class cutting quality; low drag resistance and strength are the trademarks of these cutter bars. Engineered details guarantee you reliable operation and contribute significantly to an extended service life.
Hydraulic lower linkage arm
The hydraulic lower linkage arm makes it easy for you to hitch up without having to adjust the linkage struts on the tractor. This ensures you always have the right weight alleviation and plenty of ground clearance at headlands. A turnbuckle provides the right setting on the NOVACAT 262 and 302 without conditioner.
Variable hitching made easy
Thanks to the adjustable mounting pins; these mowers can be hitched up to a wide range of tractor types quickly and easily. As a result you make full use of the whole mowing width.
Practical PTO shaft holder makes hitching up easier.
A handy blade box provides space for replacement blades.
The blade tool is kept on the machine
The cutter bar is raised using double-acting spool valves. A low transport height is achieved by folding the mower through 115deg. The centre of gravity is on the tractor’s centreline and the driver has a clear view to the rear in both side mirrors.
The EXTRA DRY conditioner is a joint development with the Institute of Agricultural Engineering (IMAG-DLO) in Wageningen (Holland) that started in 1997 to prove there is better way. Your forage dries measurably faster thanks to the adjustable conditioning intensity and wide placement.
V-shaped steel tines of hardened steel guarantee a continuous flow of crop and an extended service life. The tines are mounted on rubber elements in a spiral configuration on the conditioning roller.
EXTRA DRY drying accelerator
The tine rotor propels the forage across an adjustable conditioning plate. Adjustable guide vanes distribute the flow of crop over the whole mowed width. The forage is then deposited in a uniform and airy blanket by the wide-spread hood. Adjustable guide vanes distribute the flow of crop over the whole mowed width. Pivoting swath plates can be used to form a swath.
Even more flexibility
Power is transmitted from the cutter bar gearbox to the rotor by drive belts with a spring-loaded belt tensioner. If the conditioner is not required; it can be removed.
The drive belts are easily detached for removing the conditioner
The drive system is reliably protected against contamination.
The greasing points are located on the outside for easy access.
We currently hold a stock of Novacat 302 ED and Novacat ST302 and ST352.
To View Brochure please click here
| Equipment Type | Grass Equipment |
|---|
