Yet another PÖTTINGER innovation: The unique swept-back tine arms guarantee a tidy distribution pattern. High performance is built in to our mounted and trailed HIT tedders.
DYNATECH for all HIT models
Rotors with a diameter of 1.30 m and five arms are ideal for young; short forage. Rotors with a diameter of 1.42 m or 1.67 m and six arms are designed for different working widths and operating conditions.
Four times as clean
Forage pick-up – small rotor diameters guarantee clean crop pick-up
Forage – optimum ground tracking of each rotor for clean forage
Spread pattern – ideal spreading angle for a uniform blanket of clean forage
Machine – no snagging thanks to the sleek design of the rotor units
The curved shape of the tine arms is unique.
Guiding the tines in a sweeping movement means less stress on the bearings. At the same time the trailed tines move more smoothly; are softer and handle the forage more carefully. The curved shape prevents forage from building up in the tine arms and wrapping around the rotors.
More safety
The bolted mounting ensures a secure fit.
A tine security system is standard – to cover all eventualities.
Tines with a longer service life
An arched mounting supports the tine springs.
Plenty of space between the tine springs and the tine arms allows for the best elasticity and movement.
Strong Super-C quality tines.
Clean forage
Offset tine lengths pick up the forage uniformly and contribute significantly to improved tedding quality. Choose between two angles by rotating the mounting through 180deg. The cleanest possible forage is guaranteed.
High-strength tine arm mountings
Tine arm mountings
The rotor plates are made of heavy-duty; thick-walled pressed components with precise placement for the tine arms. In addition; the tine arms are also bolted to the rotor hubs to ensure an extremely secure mounting.The tines and tine arms are subject to the highest stress during tedding. The solid flat bar tine arms feature indentations to ensure that the tines remain securely in place.
Actively setting the wheels at an angle causes the tedder to run diagonally so the forage is directed onto the mown area. Neighbouring crops remain untouched. Because the wheels can be set to the left or right; fenceline tedding can be activated in any driving direction.
Mechanical fenceline tedding system
HIT 4.47 / HIT 4.54
The wheels on all four rotors are set individually by hand.
Lever positions centre – left – right
HIT 6.61 / HIT 6.69 / HIT 6.80
The angle is adjusted using a lever on each wheel.
Hydraulic fenceline tedding system
HIT 6.61 / HIT 6.69 / HIT 6.80 / HIT 8.81 / HIT 8.91
All the wheels can be adjusted conveniently from the tractor seat by a double-acting hydraulic cylinder into the positions left; centre; right. The wheel position indicator is clearly visible from the driver’s seat.
The most cost-effective version
If you do not require a fenceline tedding system; the wheels are mounted securely to the rotor casing as standard using roll pins.
Four Rotor Tedders
These tedders offer working widths (DIN) of 4.40 m and 5.20 m; feature a highly compact construction and are ideal for working on slopes. Compact advantage. Six tine arms per rotor guarantee an optimum spread pattern for every forage.
Very short headstock
HIT mounted tedders are known for their short headstock. This brings the centre of gravity closer to the tractor. Less lifting power is needed and driving safety is increased.
For optimum cornering
Tedders with pivoting headstocks follow in the tractor’s tracks without swivelling out.
The pivoting headstock with a heart-shaped pivot pin brings the machine into the centre position when it is raised.
A slotted hole is provided for operation with a jockey wheel and rigid top linkage.
A practical PTO shaft holder makes hitching and unhitching a great deal easier.
The transport interlock enhances safety on the road.
Six Rotor Tedders
The tedder series for farmers who place value on high performance; top-of-the-range equipment and convenient operation.
Working widths of (DIN) 5.75 m / 6.45 m / 7.45 m offer high outputs. The small rotor diameter of 1.30 m guarantees exceptional ground tracking; perfect forage pick up and a more uniform distribution pattern.
Short headstock
HIT tedders are especially noticeable for their short headstock. Consequently; the centre of gravity is moved closer to the tractor. The heart-shaped pivot pin brings the machine into the centre position when it is raised. The vertical point of rotation reliably prevents under-running when working downhill.
In the transport position; the raised rotors are tilted very close to the tractor. This favourable centre of gravity means improved safety while driving. The double constant velocity joints in the driveline allow the rotors to turn in any position; eliminating the possibility of operator errors. Warning signs and road lights are standard.
Eight Rotor Tedders
We meet the highest specifications in the professional sector with these eight rotor machines. You will be impressed by how convenient they are to operate. The ideal tedder for your mower with a working width of 3 m.
Working widths of (DIN) 7.70 m / 8.60 m offer high outputs. The small rotor diameter of 1.30 m on the HIT 8.81 guarantees exceptional ground tracking; perfect forage pick up and a uniform distribution pattern.
Compact and safe during transport
A power coupling can pivot the outer rotors on the eight rotor tedders through 180deg for transport.
For optimum cornering
The two inner rotors on the HIT 8.81 and HIT 8.91 are fitted with 16 x 9.50-8 flotation tyres. This improves weight distribution during operation.
Tedders with pivoting headstocks follow in the tractor’s tracks without swivelling out.
The heart-shaped pivot pin ensures the machine is in the centre position when it is raised.
A slotted hole is provided for operation with a jockey wheel and rigid top linkage.
A practical PTO shaft holder and hose tidy makes coupling and uncoupling a great deal easier.
The transport interlock enhances safety on the road.
Compact and safe during transport
A power coupling can pivot the outer rotors on the eight rotor tedders through 180deg for transport.
Low transport height.
Warning signs and road lights are standard.
Parkable in the transport position.
The parking height is just 2.87 m / 3.26 m; so these tedders easily fit into the machinery barn.
We currently hold a stock of HIT 4.54; 66.69; 6.80 and 8.81.
To View Brochure please click here
Equipment Type | Grass Equipment |
---|